12222 | Dobinsons 75mm MRA Lift Kit to suit Ford Ranger RA / Next Gen 4x4 Dual/Extra Cab 2022-Onwards

DETAILS

Dobinsons 75mm MRA Height Adjustable Lift Kit to suit Ford Ranger RA / Next Gen 4x4 Dual/Extra Cab 2022-Onwards

⚠️ CRITICAL FITMENT NOTICE – UCA COMPATIBILITY
To ensure correct fitment, you must inspect your factory Upper Control Arms before placing an order. Your vehicle may be fitted with either alloy or steel knuckles, and these require different UCAs.

How to identify your knuckle type:
Steel Knuckle:
Rougher, darker finish
Common on MY23 Ranger XL / XLS

Alloy Knuckle
Smoother, lighter finish
Found on MY23 Ranger XLT / Sport / Wildtrak / Platinum and most Everest variants

These parts are not interchangeable. By purchasing, you acknowledge that you have checked your vehicle and selected the correct option.

NOTE: 
- This is for the 4x4 Dual/Extra Cab models ONLY.
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

Type: Ranger
Model: RA / Next Gen
Year: 2022 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 75mm Lift
Rear Lift: 40mm - 45mm Lift
Detail:
- 4x4 Dual/Extra Cab Models
- Monotube Remote Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

COMPONENTS

Front:
2x Dobinsons MRA Front Shocks - MRA19-A108
1x Pair Dobinsons Front Springs
2x Dobinsons Strut Mounts - SC19-015
1x Pair Trundles Upper Control Arms - UCA3091A or UCA3091S

Rear:
2x Dobinsons MRA Rear Shocks - MRA19-A109
2x Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB19-1104K
2x Dobinsons U-Bolt Kit - UB19-473K

EXTRAS

Dobinsons Shackle Kit - SK19-058
Dobinsons Shackle Pin - SP59-060

If you require fitting instructions for the MRA19-A108 shock, please click here