Profender 75mm MG Height Adjustable Lift Kit to suit Toyota Hilux N70 KUN26 2005-2015
Profender 75mm MG Height Adjustable Lift Kit to suit Toyota Hilux N70 KUN26 2005-2015
Suits KUN26 3.0L T/D Models Only.
Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.
Type: Hilux
Model: N70
Year: 2005 - 2015
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 75mm Lift
Rear Lift: 50mm - 75mm Lift
Detail:
- KUN26 3.0L T/D Models Only.
- Monotube Internal Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
The N70 Hilux sits nose down from factory, if you are chasing an even ride height you will need to lift the front of vehicle 75mm (3"), and lift the rear 50mm (2").
If you have a Single Cab or Petrol N70, we recommend that you lower the specifications of the coil spring by one part number for best result.
You will also require Upper Control Arms and a Diff drop at 75mm. A 100mm Lift is achievable with extra components. This will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, and is up to the customer to set these any higher than a 75mm Lift.
NON-ABS vehicles are required to have a brake Adjuster installed when lifting the vehicle.
You may be able to achieve 575mm extended length on the shocks in some vehicles but this may cause plunge and bind issues.